128 Command Groups
Power Over Ethernet (PoE)
RMON
Command Description Mode*
power inline Enables/disables the ability of the port to
deliver power.
IC
(Ethernet
)
power inline legacy Enables/disables the ability of the switch to
support legacy Ethernet powered devices.
GC
power inline powered-
device
Adds a comment or description of the
powered device type.
IC
(Ethernet
)
power inline priority Configures the port priority level for the
delivery of power to an attached device.
IC
(Ethernet
)
power inline traps Enables/disables inline power traps. GC
power inline usage-
threshold
Configures the system power usage
threshold level at which a trap is generated.
GC
show poe-firmware-version Displays the version of the PoE controller
firmware present on the switch file system.
PE
show power inline Displays the total available power, the total
power consumed in the system, and the
globally set usage threshold.
PE
show power inline ethernet Displays the inline power summary for the
interface.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
rmon alarm Configures alarm conditions. GC
rmon collection history Enables a Remote Monitoring (RMON) MIB
history statistics group on an interface.
IC
rmon event Configures an RMON event. GC
show rmon alarm Displays alarm configurations. UE
