A SERVICE OF

logo

Open as PDF
next previous
OSPF Commands 897
Command Mode
Global Configuration mode.
User Guidelines
The command prompt changes when the router ospf command executes.
Example
The following example enters into router OSPF mode.
console(config)#router ospf
console(config-router)#
show ip ospf
Use the show ip ospf command to display information relevant to the OSPF
router. This command has been modified to show additional fields.
Syntax
show ip ospf
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
Some of the information below displays only if you enable OSPF and
configure certain features. The following fields may be displayed:
Router ID A 32-bit integer in dotted decimal format identifying the router
about which information is displayed. This is a configured value.
OSPF Admin
Mode
Shows whether OSPF is administratively enabled or disabled.