A SERVICE OF

logo

Open as PDF
next previous
Back to Contents Page
Setting Up the Monitor
Dell™SP2309W Flat Panel Monitor User's Guide
Unfolding the double-hinged monitor
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (Optional)
Wall-Mounting the Monitor(Optional)
Unfolding the double-hinged monitor
Connecting Your Monitor
To connect your monitor to the computer:
1. Turnoffyourcomputeranddisconnectthepowercable.
2. Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer.Donotuseallthecablesonthesamecomputer. Use all of the cables only when they are connected to different computers with appropriate
video systems.
Connecting the Blue VGA Cable
WARNING:Donotplacethedouble-hinged monitor face down for folding.
The base hinge can spring up and cause serious injury or damage.
1.
With the monitor still in its flat, folded state, set it screen-side up on a flat surface.
2.
Tilt the panel toward you without touching or putting pressure on the screen.
3.
Remove the shipping strap (do not cut it; do not flip the display to remove).
4.
Put the shipping strap in a safe place, in case you need it to ship the monitor.
5.
Lift and lower the base hinge for proper viewing.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.