SERIAL Digital I/O Series User Manual Eagle Technology - Data Acquisition
Applications
The SERIAL µDAQ series can be used in the following applications:
• Automation test equipment.
• TTL compatible status monitoring.
• Plant/Factory process control.
• Pulse counting.
• Frequency measurement.
• Frequency generation.
• Controlling and monitoring of any TTL compatible equipment.
• Mobile computing.
• Laboratory applications
Key Specifications
• 3,6,9,12 or 15 x 8-bit ports.
• 6 x 16-bit counters.
• Fully programmable digital input/output system.
• Fully programmable counter-timer system.
• Fully programmable interrupt support.
• 14-bit Resolution analog input system with a max range of ±10 volt.
• Fully programmable channel/gain list @ 3 KHz.
• 14-bit Resolution analog output system with a range of ±10 volt.
Software Support
The SERIAL µDAQ series is supported by EDR Enhanced and comes with an extensive
range of examples. The software will help you to get your hardware going very quickly. It also
makes it easy to develop complicated control applications. All operating system drivers, utility
and test software are supplied on the EDR Enhanced CD-Rom. The latest drivers can also be
downloaded from the Eagle Technology website. For further support information see the
Contact Details section.
Contact Details
Below are the contact details of Eagle Technology.
Eagle Technology
PO Box 4376
Cape Town
8000
South Africa
Telephone +27 (021) 423 4943
Fax +27 (021) 424 4637
E-Mail eagle@eagle.co.za
Website http://www.eagledaq.com
Eagle Technology © Copyright 2003 – www.eagledaq.com 1
