SERIAL Digital I/O Series User Manual Eagle Technology - Data Acquisition
2
2. Installation
This chapter describes how to install and configure the SERIAL µDAQ device for the first
time. Minimal configuration is necessary; almost all settings are done through software. The
operating system will take care of all resource assignments.
Package
SERIAL µDAQ package will contain the following:
• SERIAL µDAQ device.
• SERIAL cable.
• 9V Power Supply
• Eagle Technology Software CD-Rom.
Operating System Support
The SERIAL µDAQ support the Windows Driver Models (WDM) driver types. The operating
systems are listed in the table below.
Board Type Revision Operating Systems Driver Type
SRL 24A/C Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 48A/C Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 72A/C Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 96A/C Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 120A Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 26 Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 30 Revision 1 Windows 2000/98/ME/XP WDM PnP
SRL 73 Revision 1 Windows 2000/98/ME/XP WDM PnP
Table 2-1 Operating System Support
Eagle Technology © Copyright 2003 – www.eagledaq.com 2
