RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2)
vii
Using the Encoding Mode dropdown list______________________________________________ 8-74
Reviewing the ISO Track Locations__________________________________________________ 8-75
Sending the Track Information______________________________________________________ 8-76
Reviewing the Sample String _______________________________________________________ 8-77
Reviewing the ASCII Code and Character Table________________________________________ 8-78
Using the Default button (Image Transfer tab)__________________________________________ 8-79
Using the Lamination tab (HDP5000-LC) ________________________________________8-80
Selecting the Lamination Position ___________________________________________________ 8-81
Adjusting the Lamination Speed - Transfer Dwell Time __________________________________8-82
Selecting the Lamination Side dropdown menu_________________________________________ 8-83
Reviewing the Card Lamination Module Unit table (No Flipper versus Flipper) _______________ 8-84
Selecting the Lamination Type______________________________________________________ 8-85
Adjusting the Lamination Temperature _______________________________________________ 8-87
Selecting the Defaults button _______________________________________________________ 8-88
Using the K Panel Resin tab ____________________________________________________8-89
Using the Scroll controls __________________________________________________________ 8-90
Using the Click and Drag capability__________________________________________________ 8-91
Selecting “inches or mm” radio button________________________________________________ 8-91
Using the Add and Delete buttons ___________________________________________________ 8-91
Selecting the Full Card____________________________________________________________ 8-92
Selecting the Defined Area(s)_______________________________________________________ 8-93
Selecting the Undefined Area(s)_____________________________________________________ 8-94
Defining the Area to activate the Card Grid____________________________________________ 8-95
Measuring the Total Card area ______________________________________________________ 8-96
Measuring the Area to be positioned on the Card________________________________________ 8-97
Selecting the Print YMC under the K and Print K Only options ____________________________ 8-98
Using the Printer Supplies tab _________________________________________________8-100
Reviewing Information on the Supplies tab ___________________________________________ 8-101
Section 9: Toolbox_________________________________________________________9-1
Accessing the Toolbox _______________________________________________________________ 9-1
Selecting the Configuration tab_________________________________________________________9-2
Using the Configuration Tab___________________________________________________________ 9-3
Using the Optional Printer Features Group Box__________________________________________ 9-3
Using the Event Monitoring Group Box __________________________________________________ 9-4
Reviewing the Ribbon Low message __________________________________________________ 9-4
Reviewing the Laminate Low Message ________________________________________________ 9-5
Using the Film Low message ________________________________________________________ 9-6
Selecting the Set Language for Printer LCD Display Group Box ____________________________ 9-6
Selecting the Calibrate Laminator tab____________________________________________________ 9-7
Selecting the Calibrate Film tab ________________________________________________________ 9-8
Selecting the Calibrate Ribbon tab ______________________________________________________ 9-9
Selecting the Clean Printer tab ________________________________________________________ 9-10
Using the Clean Printer Group Box __________________________________________________ 9-12
Selecting the Advanced Settings tab ____________________________________________________ 9-13
Reviewing the No Printer Connected error message _____________________________________ 9-15
Reviewing the Value outside the Range error message ___________________________________ 9-15
Section 10: Cleaning______________________________________________________10-1
Using the Required Supplies__________________________________________________________ 10-1
Safety Messages (review carefully)_____________________________________________________ 10-2
Accessing the Clean Printer tab________________________________________________________ 10-3
Cleaning the Printer Platen Roller and Card Feed Rollers _________________________________ 10-3
Cleaning Procedures ________________________________________________________________10-5
Cleaning inside the Printer _________________________________________________________ 10-5
