RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
7-46
Using the Advanced Image Color window (continued)
Step Procedure
2 For the Image Quality slider bar controls, see below.
• Click OK to accept any variance from the default (for this specific slider
bar) and return to the Image Color tab window.
• Click Cancel to negate any variance on the slide and return to the Image
Color tab window.
• Click on the Default button to clear changes back to the default settings
for this window only.
In addition, here are further instructions:
• Sharpness (Default, 0%): Move the slide to the left for (-) or less
sharpness. Move the slide to the right (+) or more sharpness of the printed
image. Study the image (on the right) to determine correct sharpness.
• Contrast (Default, 0%): Move the slide to the left for (-) or less contrast.
Move the slide to the right (+) or more contrast of the printed image. Study
the image (on the right) to determine correct contrast.
• Gamma (Default, 0%): Move the slide to the left for (-) or less gamma.
Move the slide to the right (+) or more gamma of the printed image. Study
the image (on the right) to determine correct gamma.
