RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
2-12
Technical Specifications (continued)
Term Description
Mechanical
Security
Locking override:
The locking solenoid has a mechanical lock override (that allows
access to the secured areas of the Printer with the appropriate key).
This lock has a barrel-type key.
Restricted access:
With the cover closed and locked, the user will not have access to
the following areas of the printer:
• Reject Hopper
• Flipper Access Door
• Ribbon/Film Cartridge access area
• Card Input Hopper
Memory 16MB RAM
Operating
Temperature
65º F to 90º F (18º C to 32º C).
Options
• Magnetic stripe encoding dual-sided (simultaneous)
• Smart card encoding (contact/contactless)
• Printer cleaning kit
Output Hopper
Card Capacity
100 cards (.030mm)
Physical Security The Printer has base-plate tie down points for physical security
(built-in bolt-holes or a Kensington-type lock receptacle).
Power Supply
• 80W
(Note: This product is intended to be supplied by a Listed Power
Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)
