A SERVICE OF

logo

14
Installation
36" Island Vent Hood
• Remove protective film on filters.
• Tip the filter into the lower slots at the rear
of the opening. Lift the filter and pull the
knob forward until the filter rests on the
slots.
• To remove the filters, grasp the knob, push
the filter towards the rear and tilt down-
wards.
12
Step
Finalize
Installation
Step
13
Install
Filters
• Remove the protective film covering the
control panel on the front face of the hood,
and any other packaging materials.
• Check all 4 lamps to assure tightness in
sockets.
• Refer to the Use and Care book for
operating instructions.
Lower Filter
Slots