6.
7.
8. Step 7
To adjust the pillow block bearings:
1. Figure 30
2.
Figure
30
Note: Turn all setscrew sets an equal
amount.
3.
Steps
1–8
Do not over tighten the
lock nuts. The pillow block bearings can
break if over tightened.
To adjust the sanding drum perpendicular to
the feed direction (Figure 32):
;ZZY
9^gZXi^dc
.%ß
HVcY^c\9gjb
Figure 32.
1.
2.
Figure 33
Figure 33.
3.
Note: After you have adjusted the drum, do
not forget to tighten the lock nuts and recheck
the alignment by repeating Steps 1–3.
