wise.
Turn the control anti-clockwise.
Reduce the simultaneous demand from
supply — make sure a dedicated supply
to mixer.
Contact Customer Service for advice on
flow regulators.
Clean – refer to ‘Flushing Procedure’.
Turn the temperature control clockwise.
(Override the max. temperature stop if
necessary).
Turn the temperature control clockwise.
(Override the max. temperature stop if
necessary).
Make sure heating cylinder is set to
maximum hot water output.
Contact Triton Customer Service for
advice on flow regulators.
Clean – refer to ‘Flushing Procedure’.
Check water elsewhere in house and if
necessary contact local water company.
Inspect the flow regulators (if fitted) and
the check valves – refer to ‘Flushing
Procedure’. Clean if necessary.
Clean showerhead.
Reduce the simultaneous demand —
make sure a dedicated supply to mixer.
Make sure service valves are fully open.
Turn off the shower and consult a
competent plumber or contact Triton
Customer Service.
Turn off the shower and consult a
suitably competent plumber.
Renew cartridge (internal seals are not
serviceable).
1.1.1
1.2.1
1.3.1
1.4.1
1.5.1
2.1.1
2.2.1
2.3.1
2.4.1
2.5.1
3.1.1
3.2.1
3.3.1
3.4.1
3.4.2
4.1.1
5.1.1
6.1.1
Not enoug
