Control panel message Description Recommended action
REPLACE CARTRIDGE
For help press
alternates with
<current status
message>
Pages remaining for this supply has
reached the low threshold. The printer
was set to stop printing when a supply
needs to be ordered.
To continue printing, press (S
ELECT
button) to exit the printer message then
press
(S
ELECT
button). The message
becomes ORDER CARTRIDGE LESS
THAN XXXX PAGES (warning).
Follow the next steps to replace the
supply.
1. Open the top cover.
2. Remove print cartridge.
3. Install new print cartridge.
4. Close the top cover.
REPLACE CARTRIDGE
To continue press
Pages remaining for this supply has
reached the low threshold. The printer
was set to continue printing when a
supply needs to be ordered.
Press (S
ELECT
button) to continue
printing the current job.
Follow the next steps to replace the
supply.
1. Open the top cover.
2. Remove print cartridge.
3. Install new print cartridge.
4. Close the top cover.
ROM DISK DEVICE
FAILURE
To clear press
alternates with
<current status
message>
The ROM disk had a critical failure and
can no longer be used.
Contact an HP authorized service or
support provider.
ROM DISK FILE
OPERATION FAILED
To clear press
alternates with
<current status
message>
The requested operation could not be
performed. You might have attempted
an illegal operation, such as trying to
download a file to a non existent folder.
Try printing again to an existing folder.
ROM DISK FILE
SYSTEM IS FULL
To clear press
alternates with
<current status
message>
The ROM disk is full. Delete files from the disk and then try
again. Use the Device Storage Manager
in HP Web Jetadmin to download or
delete files and fonts.
Interpreting control-panel messages (continued)
ENWW Understanding printer messages 165
