scale: 1" = 1"
17 18 19 20
!
Reset
26477a
1
2
3
4
Figure 6 Verifying power-on LEDs
Table 10 Power-on LEDs
Item
Description
Indicators
1UIDLED
Off
2
Health ID LED Steady green light
3
Module status LED Steady green light
4
Port status LED
Steady green light
Set the sw
itch Ethernet IP address
To set the Ethernet IP address:
1. Verify that the enclosure is powered on.
2. Verify th
at the switch is installed.
3. Choose one of the following methods to set the Ethernet IP address:
• Using Enclosure Bay IP Addressing (EBIPA)
• Using ex
ternal DHCP
• Setting the IP address manually
Using Enclosure Bay IP Addressing (EBIPA)
To set the Ethernet IP address using EBIPA:
1. Open a web browser and connect to the active OA.
2. Enable EBIPA for the corresponding interconne ct bay.
3. Click Apply to restart the switc h.
4. Verify the IP address using a Telnet or SSH login to the switch, or by selecting the switch in the OA
GUI Rack Overview window .
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
23
