flowcharts do not provide a troubleshooting solution, follow the diagnostic steps in "General diagnosis
flowchart
(on page 55)." The General diagnosis flowchart is a generic troubleshooting process to be used
w the
hen problem is not server-specific or is not easily categorized into the other flowcharts.
n
edures, hardware options, software tools, and operating systems supported by the
server.
IMPORTANT: This guide provides information for multiple servers. Some information may not
apply to the server you are troubleshooting. Refer to the server documentation for informatio
on proc
ver documentation before removing, replacing, reseating, or modifying
system components.
WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary
information in the ser
Familiarize yourself with the safety information in the following sections before troubleshooting the server.
Important safety information
Important safety information
Before servicing this product, read the Important Safety Information document provided with the server.
Symbols on equipment
g symbols may be placed on equipment to indicate the presence of potentially hazardous
The followin
conditions.
ergy circuits or electric shock
his
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of hazardous en
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open t
The area contains no
To reduce the risk of injury from electric shock hazards, do not open this
enclosure.
This symbol indicates the presence of electric shock hazards.
user or field serviceable parts. Do not open for any reason.
WARNING:
ent,
do not plug telephone or telecommunications connectors into this receptacle.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipm
surface or hot component. If this surface
the risk of injury from a hot component, allow the surface to
cool before touching.
This symbol indicates the presence of a hot
is contacted, the potential for injury exists.
WARNING: To reduce
100-240 lb
component exceeds the recommended weight for one
,
health and safety requirements and guidelines for
manual material handling.
49-109 kg
This symbol indicates that the
individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment
observe local occupational
Troubleshooting 51
