A SERVICE OF

logo

SNMP MIBs support 54
The following are the enterprise SNMP traps supported in the GbE2 Interconnect Switch:
Table 14 Supported enterprise SNMP traps
Trap name Description
bt2SwDefGwUp
Signifies that the default gateway is alive.
bt2SwDefGwDown
Signifies that the default gateway is down.
bt2SwDefGwInService
Signifies that the default gateway is up and in service.
bt2SwDefGwNotInService
Signifies that the default gateway is alive but not in service.
bt2SwLoginFailure
Signifies that someone failed to enter a valid
username/password combination.
bt2SwPrimaryPowerSupplyFailure
Signifies that the primary power supply failed.
bt2SwVrrpNewMaster
Indicates that the sending agent has transitioned to Master
state.
bt2SwVrrpNewBackup
Indicates that the sending agent has transitioned to Backup
state.
bt2SwVrrpAuthFailure
Signifies that a packet has been received from a router whose
authentication key or authentication type conflicts with this
router’s authentication key or authentication type.
Implementation of this trap is optional.
bt2SwRackLocationChange
Signifies that the GbE2 Interconnect Switch has had a
location change.
bt2SwTempExceedThreshold
Signifies that the switch temperature has exceeded maximum
safety limits.
bt2SwTempReturnThreshold
Indicates that the switch temperature has returned below
maximum safety limits.
bt2SwApplyComplete
Signifies that the new configuration has been applied.
bt2SwSaveComplete
Signifies that the new configuration has been saved.
bt2SwFwDownloadSucess
Signifies that the firmware has been downloaded to
[image1|image2|boot image].
bt2SwFwDownloadFailure
Signifies that the firmware downloaded failed to
[image1|image2|boot image].
bt2SwFanFailure
Indicates that the fan failure has been detected.
bt2SwFanFailureFixed
Indicates that the fan failure has been fixed.
bt2SwUfdfoLtMFailure
Signifies that an LtM link is down.
bt2SwUfdfoLtMUP
Signifies that an LtM link is up.