A SERVICE OF

logo

Open as PDF
next previous
Managing the Battery
User’s Guide 10–3
November 26, 2003 11:47 am
NOTE: If the battery is not fully charged, you must connect the
AC Adapter to the Pocket PC to fully charge it before continuing.
It takes up to four hours to fully charge a completely drained
battery.
Removing the Battery
NOTE: Before removing the battery, use ActiveSync to back up
data on your Pocket PC. If you need to clear the memory during
the removal process, you will be able to restore the data.
To remove the battery from the iPAQ Pocket PC h6300 Series:
1. Insert the stylus into the battery lock 1 and slide it to the
right or unlocked position.
2. Slide the battery latch down 2 to release the battery.
3. Remove the battery 3.