RUNNING THE CLEANING PAGE
P2030 Only
To run the Cleaning Page, make sure that the ready light is on. Insert a transparency in the paper tray.
Open the printer-driver properties screen and click on the device settings tab.
In the cleaning page area press start.
P2050 Only
Insert a transparency in the paper tray. Open HP toolbox FX and click on the device settings folder.
Click on the TROUBLESHOOTING page.
In the cleaning mode area click on start.
The cleaning process takes about 2 minutes. The cleaning page will stop periodically during the cleaning process. Do not turn the
printer off until the process has finished. For these printers, HP recommends that transparencies be used instead of paper.
PRINTER TROUBLESHOOTING
P2030 Series
As with most of the new low cost Hp machines, these printers do not have a display panel. All the error codes consist of different
pattern of the five lights.
Attention light blinking: Print cartridge door open.
Bottom three lights on: Fatal error; turn the printer off, and unplug it for 5 minutes. If the error still exists, the printer has a major
problem. There is no information yet on what these problems may be. The service manual simply states to contact HP!
Toner light blinking: Toner cartridge missing.
Toner light on steady: Toner low.
STATUS ALERT MESSAGES
P2030 Series
10.X Supply memory error
13.XX Paper jam
50.X Fuser error
52.0 Scanner error
P2050 Series
10.X Supply memory error
13.XX Paper jam
21.X Print failure
41.2 Engine error
50.X Fuser error
51.X Scanner error
57 Fan error
59.X Main motor error
HP P2035 • 2055 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
