A SERVICE OF

logo

IPGSM-4GC Commercial Fire Communicator – Installation and Setup Guide
10
PowerBoost1 Information
LED Indicator STATUS
AC (green) AC power available.
ACTIVE (green) Cyclical flashing – normal communications.
Repetition of 3 flashes – loss of communications.
LOW BATT (yellow) Missing or low battery.
TROUBLE (yellow) One or more trouble conditions exist, such as; overload, output
supervision, ground fault, or charger failure.
Notes:
If AC power is lost and the battery voltage falls below 10v, the PowerBoost1 output voltage will be turned
off. The output power is turned back on when AC power is restored.
You must use the DIP switch settings shown below.
iPGSM-COM-003-V0
TROUBLE LED
INDICATOR
PowerBoost1
15
ON
2
3
4
Configure DIP switch
as shown:
AC LED
INDICATOR
ACTIVE LED
INDICATOR
LOW BATT LED
INDICATOR
15
ON
2
3
4
(Switch handle = white)