A SERVICE OF

logo

Hardware Installations and Upgrades
Intel
®
Server Chassis SR1450 User Guide 35
7. Open the connector on the rear of the floppy drive by pulling up on the connector cover. See
letter “A” in the figure below.
8. Insert one end of the 26-pin floppy drive flat flex cable end into the connector. See letter “B” in
the figure below.
9. Push down on the connector cover to lock the cable into place. See letter “C” in the figure
below.
TP01604
A
B
C
Figure 21. Installing Floppy Flat Flex Cable to a Floppy Drive
10. Connect the opposite end of the floppy flex cable to the matching connector on the interposer
board. See letter “A” in the figure below.
11. Install floppy interposer board to floppy tray by inserting the left side into the tray slot (See
Letter “B” in the figure below) and securing the other side with a screw (See letter “C” in the
figure below).
12. Install floppy drive into slimline drive bay until it clicks into place.
Figure 22. Installing the Floppy Drive Interposer Board