Intermec EasyCoder PD4—User’s Guide 3
Chapter 1—Introduction
Safety Warnings
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side door is open, so ensure that
the door is closed before you operate the printer.
• Do not open the front/left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the power is
on.
• Place the printer on an even surface which can support its weight of
approximately 13 kg (28.7 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose to clean
the premises in an industrial environment, remove the printer or pro
-
tect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a clean
-
ing card.
Product Identification
e machine label is attached to the printer’s rear plate and contains
information on type, model, and serial number as well as AC voltage. It
also contains various signs of approval.
