19
3 Connecting the alarm cable
(A Page 22)
Connect the alarm cable and wind the
waterproof tape (adhesive).
After connecting, push the cable into the arm of
the camera.
Note：
●
For cables that are not used, be sure to wrap
the ends individually with insulating tape.
●
For safety reasons, turn on the power only after
all the connection is complete.
4 Mount the cap
5 Seal the cable connection hole and
around the mounting surface of the
camera with waterproof seal (GE
silicon).
Note：
●
Ensure that waterproof treatment is performed.
Otherwise, the camera may malfunction due to
rain water seepage.
●
Use GE silicon or other similar product for the
sealing material.
6 Remove the dome cover protective
sheet
Wind the waterproof tape
(adhesive)
Arm
4
5
Waterproof
treatment
Cap
Protective
sheet
