77
A Restart Reboots the camera. (It takes a few minutes for the camera to reboot.)
B All Settings
[Initialize]
Restores all settings to their default values and reboots the unit. (It takes
about one minute for the camera to initialize and reboot.)
Passwords will also be initialized. The built-in clock of VN-V686WPU will not
be affected. JPEG/MPEG4 transmission and all other services that are
running will be discontinued.
C Update Upgrades the firmware version of VN-V686WPU and reboots the unit.
Select the update target from [Streaming Manager], [PTZ Controller] or
[Image Processor].
The settings of VN-V686WPU will be saved. Copy the new firmware file to
the computer on which Internet Explorer is used, and specify this file using
the [Browse...] button. Press the [Update] button to start the update. JPEG/
MPEG4 transmission and all others services that are running will be
discontinued. The update process may take several minutes.
A message will be displayed on the Internet Explorer when update is
successfully completed.
Note：
●
Do not turn off the power when update is in progress or during reboot after
update is complete. Turning off the power of the camera may cause it to
malfunction.
D
Auto Cleaning
This item sets whether to automatically clean the power and signal
transmission components.
Note：
●
When the camera has stopped at the pan position for more than 7 days, it will
pan at the specified time and perform cleaning automatically.
E
Auto Cleanig Time
This item sets the time to start cleaning.
To change the setting, enter the time and click the [Apply] button.
[Setting values : 0-23 h, 0-59 m]
