4-16
Viewing pictures on your TV
The video out feature on the camera allows you to show the pictures from the
memory card on your TV.
☞ The camera’s LCD is disabled when the camera is attached to the video
cable.
To view pictures on a TV:
1 Turn your TV and the camera off.
2 Insert the video output cable into the video out
connection on the side of your camera.
3 Connect the other end of the cable to the video in
connection on your TV.
☞ To play sound on your TV, use a cable that has
two connectors on the TV end. Connect the
yellow connector to the video in connection
and the white connector to the audio in
connection.
4 Turn on the camera and TV.
5 Set the Mode dial to Review.
6 Set the TV to the correct channel for viewing
video.
The pictures that are stored on the memory card
appear on the TV screen as they appear on the
LCD.
7 Scroll through your pictures using any of the
three methods described in the “Viewing
pictures” section on page 4-5.
☞ If pictures do not appear on the TV, you
may need try a different channel or adjust
the Video preference on the camera. Refer
to page 4-4.
