. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-32 Preparing for Use with PC
Places a set of files within the “DCS4XX” subdirectory.
Overwrites any existing DCS drivers already in the directory. This
driver processes images from other KODAK DCS cameras (except for
the DCS 100 or 200.)
Installing TWAIN Driver(s)
Follow these steps to install the KODAK Driver(s) for TWAIN-compliant
PC applications for use with the DCS 465 Camera Back.
1. Start Microsoft Windows and make sure that you are in the Program
Manager.
2. Insert the diskette labeled “KODAK Drivers for TWAIN-compliant
Software for use with DCS 465” into your floppy drive.
3. Open the README file for the installation process by following these
steps:
A. Choose R
UN from the FILE menu.
B. Type
A:\README.TXT (type B:\README.TXT if the diskette is in drive B)
in the command line.
C. Click OK; the file opens.
D. After reading the file, choose E
XIT from the FILE menu; you are
returned to the Program Manager.
4. Continue the installation process by following these steps:
A. Choose RUN from the FILE menu.
B. Type
A:\SETUP (type B:\SETUP if the diskette is in drive B) in the
command line.
C. Click OK.
