©Eastman Kodak Company, 2000
December 2002 • E-24
TECHNICAL DATA / COLOR FILM
KODAK VERICOLOR Slide Film
KODAK VERICOLOR Slide Film is intended for producing
same-size positive transparencies from color negatives or for
making reduced-size transparencies from larger negatives.
You can use this film for professional and photofinishing
applications with contact-printing or copying and
duplicating equipment. You can also use this film to copy
black-and-white line art to make reverse-text slides or crop
negatives to make tighter composition on transparencies.
This film is coated on an acetate base, and is available in
35 mm x 100-foot rolls (5072 Film) and 135-36 rolls
(SO-279 Film). You can mount it in standard 2 x 2-inch slide
mounts or use it uncut as film strips.
Process KODAK VERICOLOR Slide Film in KODAK
FLEXICOLOR Chemicals for Process C-41.
SIZE AVAILABLE
KODAK VERICOLOR Slide Film / 5072
—NOTICE—
These films are discontinued.
KODAK VERICOLOR SLIDE FILM / 5072
(Rolls)
Rolls (mm x ft) Spec No.
Acetate
Base
CAT No.
35 x 100 ft, perf VS 663
5-mil
(0.13 mm)
122 1217
STORAGE AND HANDLING
High temperatures or high humidities may produce
undesirable changes in VERICOLOR Slide Film. Store
unexposed film at 13°C(55°F) or lower in the original
sealed package. To prevent condensation on film that has
been refrigerated, allow the film to warm up to room
temperature before you open the package.
Use the film as soon as possible after purchase, and before
the expiration date. For consistent results, use the same
handling procedures between exposure and processing.
Keep exposed film cool and dry, and process it as soon as
possible after exposure. If processing must be delayed, you
can minimize changes in the latent image of KODAK
VERICOLOR Slide Film by storing it in a moistureproof
container and freezing it before processing. Allow the film to
warm up to room temperature before you process it.
Store processed film at 21°C(70°F) or lower at a relative
humidity below 50 percent. For information on long-term
storage, see KODAK Publication No. E-30, Storage and
Care of KODAK Films and Papers—Before and After
Processing.
Note: When you use KODAK VERICOLOR Slide Film for
reverse-text slides, and exact color reproduction is not
critical, you do not have to freeze the exposed film if you
process it within 7 days.
DARKROOM RECOMMENDATIONS
Do not use a safelight. Handle unprocessed film in total
darkness.
