KODAK VERICOLOR Slide Film
Minor Revision 12-02
Printed in U.S.A.
KODAK VERICOLOR Slide Film
KODAK Publication No. E-24
CAT 000 0000
PROCESSING
Process KODAK VERICOLOR Print Film in KODAK
FLEXICOLOR Chemicals for Process C-41. Do not process
this film in washless minilab process cycles, i.e., Process
C-41B and C-41RA. This film is of an older design that
requires a stabilizing agent for image stability. Process this
film only in a processor that uses KODAK FLEXICOLOR
Stabilizer III and Replenisher.
For information on processing, see KODAK Publication
No. Z-131, Using KODAK FLEXICOLOR Chemicals at
www.kodak.com/go/photochemicals.
RETOUCHING
Use KODAK E-6 Transparency Retouching Dyes or
KODAK Liquid Retouching Colors to retouch
transparencies made on KODAK VERICOLOR Print Film.
Note: Although both types of dyes will produce a good
visual match, neither will perfectly match the image dyes of
KODAK VERICOLOR Print Film; therefore, you may
notice a slight mismatch in photomechanical reproductions
of the transparencies. Also, when retouched transparencies
are used in displays for an extended period of time, the
retouching dyes and image dyes may not change a the same
rate.
MORE INFORMATION
Kodak has many publications to assist you with information
on Kodak products, equipment, and materials.
The following publications are available from Kodak
customer service, or from dealers who sell Kodak products,
or you can contact Kodak in your country for more
information.
Note: The Kodak materials described in this publication for
use with KODAK VERICOLOR Films are available from
dealers who supply KODAK PROFESSIONAL Products.
You can use other materials, but you may not obtain similar
results.
E-30 Storage and Handling of KODAK Films and Papers—
Before and After Processing
Z-131 Using KODAK FLEXICOLOR Chemicals
Kodak, Estar, Flexicolor, Vericolor, and Wratten are trademarks.
