A SERVICE OF

logo

A-61555 March 2007 3-33
Enabling the scanner In order to scan documents, the scanner must be enabled. This is done
using the capture application software. When the scanner is enabled,
the following screen is displayed.
Scanning After enabling the scanner, depending on how your scanner is
configured, your scanner will automatically start scanning, or you can
touch the Scan button from the enabled screen. The following screen is
displayed:
NOTE: The options that appear on the screens above may be different
depending on how your OCP function keys are set up.
Enabled - Image Addressing - off Enabled - Image Addressing - on
Scanning - Image Addressing - off Scanning - Image Addressing - on