Compose the picture as described in the basic recording
section (p. 33). Press and hold the shutter-release button all
the way down (1) to begin taking pictures. The camera con-
tinues to record images until the maximum number has
been taken or the shutter button is released.
The built-in flash can be used with standard and high-
speed continuous advance, but the rate of capture is
reduced because the flash must recharge between frames.
To change function dial or Digital Effects
Controller settings quickly, simply press and
hold the center dial or controller button (1)
and select the setting with the front and rear
control dials (2). Release the center button of
the function dial or Digital Effects Controller to
set the change. The exposure-compensation
button can be operated the same way.
Camera Notes
65
1
1
1
2
2
