EN-34
Auto Exposure Bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range to take three shots after
you press the shutter button once. AEB settings can be combined with exposure compensation settings
to extend the adjustment range.
1. Rotate the mode dial to , P ,
, , or and turn your
camera on by pressing the ON/OFF button.
2. Press the MENU button , then use to select the [FUNCTION]
menu.
3. Use T to select [CAPTURE MODE], then press the button.
4. Use S or T to select [AEB], then press the button.
5. To exit from the menu, press the MENU button.
The
indicator is displayed on the monitor screen.
6. Press the shutter button to shoot.
In this mode, the flash and the self-timer (10+2) features will be disabled.
If the remaining number of shots is less than 3, this mode will be disabled.
After capturing subsequent images in the sequence, if the remaining number of shots is less than 3, the camera
will show memory full message.
CAPTURE MODE
BURST
SINGLE
X1
AEB
3 / 3
PICTURE FUNCTION
2 / 3
AUTO
