A SERVICE OF

logo

If you are replacing an old memory module, open the retaining clips and
remove the memory module being replaced as shown.
6. Position the memory module over the memory slot. Make sure that the notch
1 on the memory module aligns correctly with the slot key 2 on the system
board. Push the memory module straight down into the slot until the retaining
clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to “Completing the FRU replacement” on
page 155.
Figure 45. Removing the old memory module
Figure 46. Installing the memory module
Chapter 9. Replacing FRUs - 607 computers 131