Chapter 2. Using the Setup Utility program
The Setup Utility program is stored in the electrically erasable programmable
read-only memory (EEPROM) of your computer. The Setup Utility program is used
to view and change the configuration settings of your computer, regardless of
which operating system you are using. However, the operating-system settings
might override any similar settings in the Setup Utility program.
Starting the Setup Utility program
To start the Setup Utility program, do the following:
1. If your computer is already on when you start this procedure, shut down the
operating system and turn off the computer.
2. Press and hold the F1 key as you turn on the computer. When you hear the
multiple beeps, release the F1 key. The Setup Utility program opens.
Notes:
a. If you have a USB keyboard installed on your computer and the Setup
Utility program does not display using this method, repeatedly press and
release the F1 key as you turn on the computer. The Setup Utility program
opens.
b. If a user password or an administrator password has been set, the
configuration settings in the Setup Utility program menu cannot be changed
without a password. See “Using passwords” for more information.
The
Setup Utility might start automatically when POST detects that hardware has
been removed or new hardware has been installed in your computer.
Viewing and changing settings
The Setup Utility program menu lists items that identify system configuration
topics.
When working with the Setup Utility program menu, you must use the keyboard.
The keys used to perform various tasks are displayed at the bottom of each screen.
Using passwords
By using the Setup Utility program, you can set passwords to prevent
unauthorized persons from gaining access to your computer and data. The
following types of passwords are available:
v User Password
v Administrator Password
You
do not have to set any passwords to use your computer. However, if you
decide to set any passwords, read the following sections.
User password
When a User Password is set, the user is prompted to type a valid password each
time the computer is turned on. The computer cannot be used until a valid
password is typed from the keyboard.
© Lenovo 2005. Portions © IBM Corp. 2005. 25
