A SERVICE OF

logo

Open as PDF
next previous
v Use 1.8 V, 240-pin, double data rate 2 synchronous dynamic random access
memory (DDR2 SDRAM).
v Use 256 MB, 512 MB, 1 GB, or 2 GB memory modules in any combination up to
a maximum of 4.0 GB.
Nota:
Only DDR2 SDRAM DIMMs can be used.
To install a memory module:
1. Remove the computer cover. See “Removing the cover” a pagina 9.
2. You might have to remove the drive bay assembly to access the memory
connectors. See “Accessing system board components and drives” a pagina 10.
3. Remove any parts that might prevent access to the memory connectors.
4. Locate the memory connectors. See Figura 4 a pagina 7.
12 Hardware Installation and Replacement Guide