Removing and replacing the front bezel
This section provides instructions on how to remove and replace the front bezel.
1. Remove the computer cover. See “Removing the cover” on page 12.
2. Remove the front bezel by releasing the three plastic tabs on the left side and
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch and LED assembly cable.
3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with
the corresponding holes in the chassis, then pivot it inward until it snaps into
position on the left side.
4. To complete the installation, go to Chapter 4, “Completing the parts
replacement,” on page 47.
Figure 6. Removing the front bezel
14 Hardware Installation and Replacement Guide
