Table 6. Power control
Option Comments
Power Status Shows the current status of the power control (OFF or ON).
Power OnSystem
Turns on the system when it is in the off state.
Power Off
System
Turns off the system when it is in the on state.
Power Cycle
System
Turns off, then reboots the system (cold boot).
Hard Reset
(Restart)
Restarts the system without turning it off (warm boot).
Conguration
The Conguration page is used to congure Network settings, user settings, updates, and so on.
Network
The Network page is used to congure the Network settings. It includes the following options:
• Automatic (Obtain an IP address automatically): Automatically obtain an IP address (use DHCP).
• Manual (Use the following IP addresses): Manually congure IP addresses.
Figure16. Network settings
You can congure the Network settings by click ncsi0 item.
Table 7. Network settings
Option Comments
MAC Address The MAC address of the device (Read Only).
IPv4 Settings
If you want to congure the IP by IPv4 protocol, enable the IPv4 and then set the IP address.
IPv6 Settings
If you want to congure the IP by IPv6 protocol, enable the IPv6 and then set the IP address.
VLAN Settings
When you enable virtual LAN, you have to set the VLAN ID and Priority.
22 ThinkServer Management Module User Guide
