Light Light status What it means
Power On The printer is online.
Ready On The printer is online and ready to print.
Blinking The printer is receiving data.
Off The printer is offline.
Tractor 2 On Tractor 2 is activated.
Note: The optional Tractor 2 Feeder must be installed.
Paper Out Off Paper is loaded in the printer.
Blinking The printer is out of paper.
On A printer error has occurred.
On The control panel is locked, restricting the use of the following buttons: Start/Stop, FormFeed,
Tear Off, and Load/Unload.
Font On One of the printer resident fonts is selected.
Off A downloaded font is selected.
Font Lock On Font Lock is active. Printer resident fonts are locked.
Light Light status What it means
Macro On The specified macro function is active.
Off No macro is being used, or Macros are disabled in the Setup menu.
Pitch On One of the printer resident pitches is selected.
Pitch Lock On Pitch Lock is active. Printer resident fonts are locked.
Setting the printer online or offline
The printer must be online to accept data.
• To set the printer online, press Start/Stop.
The Ready light comes on. If paper is not loaded, the Paper Out light blinks. When online, the printer is ready to
receive print jobs.
• To set the printer offline, press Start/Stop.
The Ready light turns off. The printer finishes printing the current line and then stops. To resume printing, press
Start/Stop until the Ready light comes on.
Advancing paper
Use these control panel buttons to advance the paper when the printer is not printing:
Note: When you are printing continuous forms, the first time you press LineFeed, it moves the paper from the Tear
Off position to the current print line before advancing the paper.
• Press LineFeed to advance the paper to the next line.
• Press FormFeed to advance the paper to the Top‑Of‑Form on the next page or to eject the cut form.
Using the control panel 18
