optional Tractor 2 Feeder
positions paper incorrectly 70
paper fed from Auto Sheet Feeder
is skewed 71
paper fed in Auto Sheet Feeder
jams at printer entrance 69
paper jammed in Auto Sheet
Feeder 69
printer does not feed from Auto
Sheet Feeder 70
printer does not feed paper 69
paper feed, troubleshooting
Auto Sheet Feeder feeds at
incorrect rate 70
paper paths
pull tractor 23
push tractor 23
paper sizes
supported by the printer 42
paper types
supported by the printer 42
pitch
locking 21
selecting 21
pitch lock
disabling 21
print quality troubleshooting
characters are wrong or
missing 73
dots are missing or print quality is
poor 72
graphics do not print 73
incorrect line length 67
incorrect line spacing or
overprinting occurs 74
incorrect number of lines on a
page 73
lines do not start at left margin 67
print is too light 72
printer goes to Tear Off position
before job finishes 66
smudged forms or print too
dark 73
specified font or pitch is not
printing or is changing 68
print troubleshooting
buttons do not work 67
incorrect characters print, left
margin changes, or printing
stops 68
left margin moves right during
printing 67
Print test works, but printer does
not print when attached to the
computer 65
printer alarm sounds 66
printer is noisy 66
printer power switch is on, but the
power light is off 67
printer sounds like it is printing,
but does not print 66
printer speed slows 67
printing continues beyond edges
of continuous forms 68
printer
cleaning 56
features and functions 9
overview 7
parts 7
test 61
printer status
checking 62
printer test page
interrupting or stopping 61
running 61
printing
demonstration page 11
from DOS 13
from Windows 13
network setup page 12
pull position
tractor 43
pull tractor
converting 45
paper paths 23
push position
tractor 43
push tractor
converting 44
paper paths 23
R
recycling
Lexmark products 57
WEEE statement 78
ribbon cartridge
removing 56
S
safety information 6
security
supporting IPSec 59
supporting SNMPv3 59
using 802.1x authentication 60
setting
Top‑Of‑Form 39, 40, 41
Setup mode
Control options 52
Data options 51
Emulation options 54
Forms Macro options 50
Interface options 54
Main menu options 49
using 47
SNMPv3 59
supplies
ordering 56
T
Tear Off function
using 24
Tear Off position
setting 24
Top‑Of‑Form
setting 39, 40, 41
tractor
pull position 43
push position 43
Tractor mode
selecting 19
troubleshooting
checking an unresponsive
printer 61
contacting Customer Support 74
restoring factory default
settings 58
troubleshooting, jams and
misfeeds
paper is jammed in the printer 68
troubleshooting, paper feed
Auto Sheet Feeder feeds at
incorrect rate 70
Auto Sheet Feeder feeds multiple
sheets 71
Auto Sheet Feeder positions paper
incorrectly 71
incorrect Top‑Of‑Form
position 70, 71
jam in Tractor 2 Feeder 69
optional Tractor 2 Feeder does not
feed 70
optional Tractor 2 Feeder
positions paper incorrectly 70
paper fed from Auto Sheet Feeder
is skewed 71
Index 83
