Using the Change Copy Default Settings submenu
1 From the Setup menu, press or repeatedly until Change Copy Default Setting is highlighted.
2 Press .
3 After changing values, press to save these values and exit this submenu.
Use this To
Color Specify to print in color or black and white.
Quality Specify print quality.
Note: Auto and Photo are good for pictures and paper-based print jobs. Auto
is good for printing on transparencies.
Content Type Specify the type of document you want to print.
2-Sided Original Specify if you want to copy a two-sided original.
Paper Handling Specify the size and type of paper loaded. For more information, see “Using
the Paper Handling submenu” on page 63.
Changing the default copy settings
1 From the control panel, press or repeatedly until Copy is highlighted.
2 Press .
3 Press repeatedly until Change Default Settings is selected.
4 Press .
From here You can
Color Choose to copy in color and black and white.
Quality Adjust the quality of a copy. You can choose among the following
options: Normal, Photo, Auto, or Draft.
Content Type Specify the type of document being copied: Text and Graphics, Photo,
Text Only, or Line Drawing.
2-Sided Original Specify whether the original document is two-sided.
Paper Handling Specify the size and type of the paper loaded.
5 Use the control panel buttons to navigate the menu items and make your choices.
6 Press to save your settings.
105
