Setting up the network printer
Paper handling
Maintenance
Troubleshooting
Administration
Index
23
Printing
www.lexmark.com
Lexmark E320/E322 Printer
Setting up clients (peer-to-peer)
1 Click Start Settings Printers.
2 Click Add Printer to launch the Add Printer wizard.
3 Click Network Print Server.
4 Select the network printer from the Shared printers list. If the printer is not listed, type
the path of the printer in the text box.
The path will look similar to the following:
\\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it to the
network. The shared printer name is the name assigned during the server installation
process.
5 Click OK.
Note: If this is a new printer, you may be prompted to install a printer driver. If no
system driver is available, then you will need to provide a path to available
drivers.
6 Select whether you want this printer to be the default printer for the client, and then
click Finish.
