Loctite 98134 Manual

A SERVICE OF

next previous

24

6.6 Bulk-14 & 34 Motor Control Fuses Kit

Part No. 986917

INSTALLATION INSTRUCTIONS:

FOR THE BULK-14 POUND UNIT

1. REMOVE TWO SCREWS FROM THE BOTTOM OF THE CONTROL PANEL AND ALLOW PANEL TO

REST.

OR

FOR THE BULK-34 POUND UNIT

1. REMOVE 2 SCREWS FROM THE UPPER CORNERS AND ALLOW PANEL TO BE LIFTED OUT.

DISCONNECT GROUND WIRE AND CONNECTORS AND PLACE PANEL IN A SAFE PLACE.

2. REMOVE FROM UNDER THE LIP OF THE FRAME, THE FOUR (4) SCREWS USED TO SECURE THE

ENCLOSURE TO THE FRAME.

3. LIFT ENCLOSURE FROM FRAME AND SET ASIDE.

4. EXAMINE THE FUSES IN THE MOTOR CONTROL, AND CHECK WITH A METER IF REQUIRED, TO

DETERMINE WHICH FUSES ARE BAD.

5. REPLACE FUSE AND RE-ASSEMBLE COVER AND CONTROL PANEL.

NOTE: BE SURE THAT ALL GROUND WIRES ARE RE-CONNECTED.