9
Troubleshooting
9-20
No paper in tray 3. Load paper into tray 3
(see page 6-10).
A wrong paper format has
been fed into tray 1, tray
2, or tray 3.
• Load paper with the format set in
the printer driver into the paper
feed tray (see page 6-8).
or
• Cancel the print job by pressing
and holding the control button for
about 5 seconds until all
indicators are on.
There is not enough toner
in the imaging cartridge.
Prepare a new imaging cartridge for
use (see page 8-5).
There is no toner in the
imaging cartridge.
Replace the imaging cartridge (see
page 8-5).
Paper feed tray 2 has not
been installed.
Hold down the control button.
A print job was sent using
the tray 2 setting in the
printer driver even though
tray 2 is not installed.
Hold down the control button.
Paper feed tray 3 has not
been installed.
Hold down the control button.
A print job was sent using
the tray 3 setting in the
printer driver even though
tray 3 is not installed.
Hold down the control button.
Indicators Meaning Action
