A SERVICE OF

logo

1. PLC Development Environment Using GX Developer
1.5 Creating Device Comments
- 45 -
(e) Completion
The setting is complete when the following dialog appears. Click [OK].
(f) Error status
If an error occurred during conversion, its status and the line where it occurred are displayed.
1.5.4 Writing Comment Data to the CNC
The following shows the method of transferring a device comment data from the GX Developer to
the CNC. The transfer method is the same as the ladder code transfer method. Ladder codes,
message data and device comment data are distinguished by their file names only.
Perform the following operation to display the [Write to PLC] screen, and choose the file to be
written.
[Online] [Write to PLC]