SX 35 DSC
47
REFERENCE
Maintenance
The SX 35 DSC VHF transceiver is produced with proven processes and
current solid state technology. With reasonable care, your SX 35 DSC will
have a long useful life.
The following precautions will prevent damage to the transceiver.
• Never press the PTT button unless an antenna or proper dummy load
is connected to the antenna jack.
• Do not operate the transceiver if the power source is not within the
specified range of 11 to 16 Vdc.
• Replace the antenna and/or coaxial cable if damaged in any way or
severely weathered.
• Avoid continuous direct sunlight on the LCD.
• Avoid overextending the microphone cable.
• Do not use solvents or harsh chemicals to clean the microphone, case-
work or LCD display.
Special Functions
Simulator Mode
Provides simulated GPS data for demonstration of realistic displays. Trans-
mitter and DSC functions are totally disabled.
• Press and hold the
MENU
key while turning power On.
Clear Memory Channels
Clears the channel bank for the Memory Scan function.
• Press and hold the
MEM
key while turning power On.
New Microphone
Initializes the keypad when a new microphone is installed.
• Press and hold the
1
key on the microphone while turning power
On.
Printer Operation
Initializes the Tx port for 4800 baud PC/printer interface.
• Press and hold the
16
key while turning power On.
