Look through the viewfinder and press the shutter release
button halfway to turn on the exposure meter. When the audio warning
does not sound. depress the button
all the way to take the picture.
In
this
case, the proper shutter speed to
match
scene brightness It displayed
by
the
LED
Inside the viewfinder. If the warning sounds, check the view-
finder Information.
If
either the top or bottom warning LED blinks, the
available light
is
too bright or too dim for the meter's range and
correct
exposure
is
not possible without adjustment. Use either a neutral density
filter to reduce the amount of light reaching the film or artificial light to
increase the subject's brightness
If the LED at
1/30
sec or below lights
up.
shutter speed
is
too slow and blur may result.
In
this case, use a
tripod to prevent
blurred images. When you
correct
the exposure, the
audio warning
will stop
16
Stroke the film advance
lever to transport the film to the
next frame.
