25
Blinking Error Lamp (red)/Specifications
• Repeat operation from step 1 on page 10 after the following remedies.
Blinks slow (once a second): Communication error with camera
Cause Remedy Page
Camera power is off Turn camera power on 10
Shutter is released during communication Do not release shutter during 7
with camera communication
Plug is loose Attach plug properly 8
Blinks fast (4 times a second): Memory card error
Cause Remedy Page
Writing error Insert new card 8
Card is not properly inserted into the slot Insert card properly 8
Card’s available memory is insufficient Insert new (empty) card 9
Card is not formatted correctly Insert correctly formatted card 13
With F100, a film in use is loaded when Remove the film in use 21
setting/changing recording data
• The memory card and the plug may be inserted or removed freely while the error
lamp is on.
Specifications and design are subject to change without notice.
• CompactFlash™ is a trademark of SanDisk Corporation.
• Microsoft®, Microsoft® Excel and Windows® are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
• Microdrive is a trademark of Hitachi Global Storage Technologies in the United
States and/or other countries.
• Products and brand names are trademarks or registered trademarks of their
respective companies.
Power Supplied by camera
Dimensions (WxHxD) Approx. 78 x 25 x 109mm or 3.1 x 1.0 x 4.3 in.
Cable length Approx. 400mm or 15.7 in.
Weight Approx. 100g or 3.5 oz. (main unit only, excluding
memory card)
Operating conditions Temperature: 0-40°C or 32-104°F, humidity: under 85%
• Specifications
• Blinking Error Lamp (red)
