A SERVICE OF

logo

Open as PDF
next previous
9
Insert a memory card straight and in the right direction.
• Do not push a memory card bent or in the wrong direction. This may cause damage
to the MV-1 or memory card.
Record setting with the F6 and F100
• It is necessary to set the camera to record shooting data. (Default setting is no
recording.) With the F6, setting is possible with the camera, while with the F100,
the MV-1 and a PC are needed (x 20).
Use a memory card in which no data remains
• If previous shooting data remains in a memory card, it may take a long time to
transfer data from a camera. Refer to "If access lamp keeps blinking for a long
time" (x 11).
MV-1 (EGFSI) 05.2.14 5:21 PM Page 9