E31
Projecting the Computer Display
Reference Section
Projecting the Computer Display
1 Before entering projector mode, display the
setup menu with the camera and set USB in
the Interface option (E 73) to Projector.
• To display the setup menu, select the z tab (A 12) in
the menu screen.
2 Turn off the camera.
3 Connect the camera to the computer using the included USB cable.
• Be sure that connectors are properly oriented. Do not attempt to insert connectors at
an angle, and do not use force when connecting or disconnecting the USB cable.
4 Turn on the camera and open the projector
cover.
• The camera enters projector mode. The camera’s
monitor remains off.
• Some computers may display a dialog prompting you
to restart the computer the first time you connect the camera with the USB option
set to Projector. Follow the on-screen instructions to restart the computer.
USB
Projector
MTP
/
PTP
