Black plate (105,1)
Model "S35-D" EDITED: 2010/ 6/ 4
SIC4131
Type A
If the power supply is disconnected, the
clock will not indicate the correct time.
Readjust the time.
ADJUSTING THE TIME
For the vehicle information display setting, see
“TRIP COMPUTER” earlier in this section.
Type A
Push the CLOCK button
*
1
to turn the clock on
or off.
1. Push and hold the CLOCK button
*
1
until
the clock display starts to flash.
2. Push the SEEK/TRACK button
*
2
to adjust
the hours.
3. Push the TUNE/FF·REW button
*
3
to
adjust the minutes.
4. Push the CLOCK button
*
1
again to exit
the clock set mode.
The display will return to the regular clock
display after 5 seconds.
SIC4275
Type B
Type B
Push the ENTER SETTING button
*
1
until
“Setting Clock” and “On-screen Clock” appear
on the display. Then turn the TUNE/SCROLL
knob
*
2
to turn the clock on or off.
1. Push the ENTER SETTING button
*
1
until
“Setting Clock” and “Clock Adjust” appear
on the display.
2. Turn the TUNE/SCROLL knob
*
2
to adjust
the hour.
3. Push the ENTER SETTING button
*
1
.
4. Turn the TUNE/SCROLL knob
*
2
to adjust
the minute.
CLOCK
Instruments and controls 2-39
