N-TRON/Admin> config save
Save Settings...
Writing 'B:\settings\settings.dat'.
Settings have been saved.
N-TRON/Admin> config reset
Resetting to factory defaults...
Load factory default settings [y/n]?y
Keep IP, subnet mask, and gateway addresses [y/n]?y
Keep current user names and passwords [y/n]?y
Keep current SNMP settings [y/n]?y
Keep current DHCP Server settings [y/n]?y
Keep current MAC Security settings [y/n]?y
*** Model Number Changed ***: Forcing reset of settings values.
*** Expected (per HW) = 0x87080000,
*** Found (Saved) = 0x00000000,
WARNING: Settings will be reset to factory default values.
Writing 'B:\settings\settings.dat'.
Done. You should now reset the device.
N-TRON/Admin>…
