A
B
D
C
2
Normal tape High position tape
To re-record
Discrimination hole
Tab for side B
Tab for side A
Side A
3
1
4
FWD
PLAY
FWD
Cassette tapes
To fast-forward or rewind the tape
Press [
44
44
4/REW/ g] or [
33
33
3/FF/ f] in the stop
mode.
To rewind To fast-forward
44
44
4/REW/ g
33
33
3
/FF/ f
To find the beginning of a program
(TPS: Tape Program Sensor)
Press [
44
44
4/REW/ g] or [
33
33
3
/FF/ f] during play.
Press the button once for each track to be skipped (up to 9 tracks).
Backward Forward
44
44
4/REW/ g
33
33
3
/FF/ f
Note
TPS searches for silent parts of about 4 seconds normally found
between tunes. As a result, it may not function properly in the
following cases.
• With short silent parts.
• When noise occurs between tunes
• With silent parts found within tunes
Before recording
Types of tapes which can be recorded correctly
The system automatically identifies the type of tape.
NORMAL POSITION/TYPE I ✓
HIGH POSITION/TYPE II ✓
METAL POSITION/TYPE IV ✕
This system cannot correctly record or erase metal position tapes.
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
The effect of volume, sound quality, and
sound virtualizer on recording.
These have no effect on recording.
They can be changed for playback.
To erase a recorded sound
11
11
1Press [STOP L].
22
22
2Press [REV MODE] on the remote control to select the reverse
mode.
33
33
3Insert the cassette with the exposed tape facing left.
Tape direction is automatically set to “
FWD
”.
44
44
4Press [[REC/ J].
A
B
C
D
RQT5717
16
Listening operationsRecording operations
e14-16 1/17/01, 6:31 PM16
