RQT5717
18
Recording operations
1
2
3
4
5
2
REV MODE
SELECTOR
REC
OPEN/CLOSE
3
1
1
4
5
PLAY
REC
MHz
RANDOM
1 -
ST
kHz
MONO
REV
PRGM
AUTO
1-REC
TUNED
dB
FWD
PLAY
MHz
RANDOM
1 -
ST
kHz
MONO
REV
PRGM
AUTO
1-REC
TUNED
dB
REC
FWD
PLAY
REC
MHz
dB
RANDOM
1 -
ST
kHz
MONO
REV
PRGM
AUTO
TUNED
1-REC
FWD
side to be recorded
facing up
Tape direction
PLAY
REC
REV
ST
MONO
TUNED
RANDOM
1 -
PRGM
AUTO
1-REC
MHz
kHz dB
FWD
Recording CDs
Normal recording
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
1 Insert the cassette with the exposed
tape facing left.
Tape direction is automatically set to “
FWD
”
2 Press [REV MODE] on the remote
control to select the reverse mode.
Every time you press the button:
:
One side is recorded.
,
3 Press [SELECTOR] to select the CD
mode.
4 Press [OPEN/CLOSE c] to open the
CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE
cc
cc
c] to close the CD tray.
5 Press [[REC/ J] to start recording.
• If you selected “ ” in step 2, the direction will automatically
change to “
” when recording starts.
• The recording will start from the first track.
To stop recording
Press [STOP L].
The recording and the CD will stop.
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].
To record on reverse side
Before recording, press [TAPE 2 3] twice and immediately there-
after [STOP L].
The tape direction will be shown as “
REV
”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
11
11
1 After step 4, program the track(s) you want (\ steps 2-4 on page
14).
22
22
2 Press [[REC/ J] to start recording.
e17-19 1/17/01, 6:32 PM18
